LE135
Based on 4 publication(s) in Google Scholar
LE135 is a potent RAR antagonist that binds selectively to RARα (Ki of 1.4 μM) and RARβ (Ki of 220 nM), and has a higher affinity to RARβ. LE135 is highly selective over RARγ, RXRα, RXRβ and RXRγ. LE135 is also a potent TRPV1 and TRPA1 receptors activator with EC50s of 2.5 μM and 20 μM, respectively.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 98.68%
- No. CAS: 155877-83-1
- Fòrmula: C29H30N2O2
- Peso molecular:438.56
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) LE135
More
Actividad biológica
|
TRPV1 2.5 μM (EC50) |
TRPA1 20 μM (EC50) |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HL-60 | IC50 |
1.5 x 10-7M
Compound: 6
|
Concentration which reduces by half the percentage of differentiated HL-60 cells induced by 1 x 10e-9 M Am80.
Concentration which reduces by half the percentage of differentiated HL-60 cells induced by 1 x 10e-9 M Am80.
|
[PMID: 9435893] |
LE135 inhibits Am80-induced differentiation of human promyelocytic leukemia cells HL-60 with an IC50 of 150 nM[1].
LE135 inhibits retinoic acid (RA)-induced transcriptional activation of RARβ, but not RARα, RARγ or retinoid X receptor α (RXRα), on a variety of RA response elements. LE135 strongly represses 12-O-tetradecanoylphorbol-13-acetate-induced AP-1 activity in the presence of RARβ and RXRα[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
No. CAS 155877-83-1
-
Appearance Solid
-
Peso molecular 438.56
-
Fòrmula C29H30N2O2
-
Color Yellow to brown
-
SMILES
O=C(O)C1=CC=C(C2=NC3=CC4=C(C(C)(C)CCC4(C)C)C=C3N(C)C5=CC=CC=C52)C=C1
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (4)
-
Journal Impact Factor
-
Most Recent
-
Cell Res
Derivation of totipotent-like stem cells with blastocyst-like structure forming potential. [Abstract]2022 Jun;32(6):513-529. PMID: 35508506 -
J Transl Med
Notch3 enhances the synergistic effect of all-trans retinoic acid and calcipotriol in pancreatic stellate cell activation. [Abstract]2025 Jun 22;23(1):694. PMID: 40545532 -
Front Pharmacol
Canagliflozin alleviates progestin resistance by suppressing RARβ/CRABP2 signaling in THRB knockout endometrial cancer cells. [Abstract]2025 Apr 30:16:1573032. PMID: 40371351 -
Am J Transl Res
Involvement of hedgehog signaling in all-trans retinoic acid-mediated suppression of colon cancer. [Abstract]2022 Sep 15;14(9):6536-6549. PMID: 36247302
Solvente y solubilidad
DMSO : 50 mg/mL (114.01 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.70 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (5.70 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (281 KB)
-
SDS (392 KB)
- English - EN (392 KB)
- Français - FR (392 KB)
- Deutsch - DE (392 KB)
- Norwegian - NO (392 KB)
- Español - ES (392 KB)
- Swedish - SV (392 KB)
- Italian - IT (392 KB)
- Korean - KR (392 KB)
- Portuguese - PT (392 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
[1]. H Umemiya, et al. Regulation of retinoidal actions by diazepinylbenzoic acids. Retinoid synergists which activate the RXR-RAR heterodimers. J Med Chem. 1997 Dec 19;40(26):4222-34. [Content Brief]
[2]. Shijin Yin, et al. LE135, a retinoid acid receptor antagonist, produces pain through direct activation of TRP channels. Br J Pharmacol. 2014 Mar;171(6):1510-20. [Content Brief]
[3]. Y Li, et al. Identification of a novel class of retinoic acid receptor beta-selective retinoid antagonists and their inhibitory effects on AP-1 activity and retinoic acid-induced apoptosis in human breast cancer cells. J Biol Chem. 1999 May 28;274(22):15360-6. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2802 mL | 11.4009 mL | 22.8019 mL | 57.0047 mL |
| 5 mM | 0.4560 mL | 2.2802 mL | 4.5604 mL | 11.4009 mL | |
| 10 mM | 0.2280 mL | 1.1401 mL | 2.2802 mL | 5.7005 mL | |
| 15 mM | 0.1520 mL | 0.7601 mL | 1.5201 mL | 3.8003 mL | |
| 20 mM | 0.1140 mL | 0.5700 mL | 1.1401 mL | 2.8502 mL | |
| 25 mM | 0.0912 mL | 0.4560 mL | 0.9121 mL | 2.2802 mL | |
| 30 mM | 0.0760 mL | 0.3800 mL | 0.7601 mL | 1.9002 mL | |
| 40 mM | 0.0570 mL | 0.2850 mL | 0.5700 mL | 1.4251 mL | |
| 50 mM | 0.0456 mL | 0.2280 mL | 0.4560 mL | 1.1401 mL | |
| 60 mM | 0.0380 mL | 0.1900 mL | 0.3800 mL | 0.9501 mL | |
| 80 mM | 0.0285 mL | 0.1425 mL | 0.2850 mL | 0.7126 mL | |
| 100 mM | 0.0228 mL | 0.1140 mL | 0.2280 mL | 0.5700 mL |
LE135 Related Classifications
HY-107436 Related Classifications
Powered by Bioz