LY2857785
Based on 4 publication(s) in Google Scholar
LY2857785 is a type I reversible and competitive ATP kinase inhibitor against CDK9 (IC50 11 nM) and other transcription kinases CDK8 (IC50 16 nM), and CDK7 (IC50 246 nM).
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.21%
- CAS No.: 1619903-54-6
- Formule: C26H36N6O
- Masse moléculaire:448.60
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Protocole
- Pureté et documentation
- Références
-
Help & FAQs
-
Apoptosis Compound Library
HY-L003
-
Cell Cycle/DNA Damage Compound Library
HY-L004
-
Kinase Inhibitor Library
HY-L009
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Aging Compound Library
HY-L034
-
Anti-Breast Cancer Compound Library
HY-L074
-
Anti-Blood Cancer Compound Library
HY-L079
-
Cancer Stem Cells Compound Library
HY-L135
-
Heterocyclic Compound Library
HY-L138
-
Cell Death Library
HY-L162
-
Serine/Threonine Kinase Inhibitor Library
HY-L164
-
Anti-Hematopathy Compound Library
HY-L171
-
Anti-Ovarian Cancer Compound Library
HY-L173
-
Multi-Target Compound Library
HY-L176
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Protein Kinase Compound Library
HY-L196
-
Non-Alcoholic Fatty Liver Disease (NAFLD) Compound Library
HY-L199
-
Cell Proliferation Compound Library
HY-L201
-
High-Throughput Bioactive Compound Library
HY-L205
-
Posttranslational Modification Library
HY-L226
-
High-Efficiency Gene Editing Compound Library
HY-L244
Publications Citing Use of MedChemExpress (MCE) LY2857785
More
Activité biologique
|
CDK9 0.011 μM (IC50) |
CDK8 0.016 μM (IC50) |
CDK7 0.246 μM (IC50) |
LY2857785 shows good selectivity against a panel of 114 protein kinases, with only 5 other protein kinases inhibited with potency (IC50) less than 0.1 μM, and a total of 14 kinases less than 1 μM. At the cellular level, LY2857785 inhibits CTD P-Ser2 and CTD P-Ser5 in U2OS cells at IC50s 0.089 (n=13) and 0.042 (n=1) μM, respectively. However, LY2857785 only induces a moderate G2-M DNA content increase, from 35% to 55%, with EC50 0.135 μM. LY2857785 shows potent compound exposure- and time-dependent cell proliferation inhibition in MV-4-11, RPMI8226, and L363 cells. When incubated between 4 to 24 hours, the cell growth inhibition potency reaches a maximal effect at 8 hours with IC50s 0.04, 0.2, and 0.5 μM for MV-4-11, RPMI8226, and L363 cells, respectively. LY2857785-induced cancer cell apoptosis is also time dependent, reaching maximal potency at 8 hours with IC50 0.5 μM in L363 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1619903-54-6
-
Appearance Solid
-
Masse moléculaire 448.60
-
Formule C26H36N6O
-
Color White to off-white
-
SMILES
CC(C1=C2C=C(C3=NC(N[C@H]4CC[C@H](NC5CCOCC5)CC4)=NC=C3)C=CC2=NN1C)C
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (4)
-
Journal Impact Factor
-
Most Recent
-
Cell Chem Biol
2018 Feb 15;25(2):135-142.e5. PMID: 29276047 -
Sci Rep
A widely-applicable high-throughput cellular thermal shift assay (CETSA) using split Nano Luciferase. [Abstract]2018 Jun 21;8(1):9472. PMID: 29930256 -
Biochem Biophys Res Commun
2019 Jun 11;513(4):967-973. PMID: 31005255 -
Oncotarget
2017 Nov 3;8(63):107206-107222. PMID: 29291023
Solvant et solubilité
DMSO : 10 mg/mL (22.29 mM; ultrasonic and warming and heat to 80°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1 mg/mL (2.23 mM); Clear solution
This protocol yields a clear solution of ≥ 1 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (10.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1 mg/mL (2.23 mM); Clear solution
This protocol yields a clear solution of ≥ 1 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (10.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocole
CDK7 and CDK9 reaction mixtures contain 10 mM Tris-HCl (pH 7.4), 10 mM HEPES, 5 mM DTT, 10 μM ATP, 0.5 μCi 33p-ATP, 10 mM MnCl2, 150 mM NaCl, 0.01% Triton X-100, 2% DMSO, 0.05 mM CDK7/9ptide, and 2 nM CDK7/Mat1/cyclin H, or 2 nM CDK9/cyclin T1, respectively. CDK8/cyclin C reaction is performed in HEPES 30 mM, DTT 2 mM, MgCl2 5 mM, 0.015% Triton X-100, 5 μM ATP, and 400 nM of RBER-CHKStide containing 20 nM of enzyme. LY2857785 in DMSO is diluted serially 1:3 for dose response. Reactions are carried out in 96-well polystyrene plates. The reactions are incubated at room temperature for 60 minutes and followed by termination with 10% H3PO4 or 10% trichloroacetic acid (TCA). For the filter binding assay, reactions are transferred to 96-well filter plates and measured by Microbeta scintillation counter. For ADP Transcreener Fluorescent Polarization Assays, reactions are quenched with ADP detection mix, incubated 2 hours at room temperature and then FP is measured at λex=610 nm, λem=670 nm on a Tecan Ultra 384 plate reader. The concentration of ADP product is calculated from millipolarization (μP) using a prepared ADP/ATP dilution series as a standard curve. Kinase profiling are carried out in 96-well polystyrene plates. Briefly, in a final volume of 25 μL the enzyme is incubated with the appropriate buffer, peptide substrate, and the diluted LY2857785. Reactions are initiated by the addition of ATP/[33P] and the ATP mix is incubated at room temperature for 40 minutes. Reactions are quenched with the addition 5 μL of 3% phosphoric acid, 10 μL of the reaction are spotted onto a filtermat, washed 3 times for 5 minutes in 75 mM phosphoric acid and once in methanol. Once the filters are dry, they are submitted to scintillation counting[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Solid tumor cells are plated in poly-D-lysine coated and hematologic cell lines are seeded in noncoated 96-well plates overnight before being treated with compounds (e.g, LY2857785). Solid tumor cells are fixed with Prefer for 20 minutes at room temperature and permeated with 0.1% Triton X-100 in PBS for 15 minutes. Caspase-3 expression is measured by immunofluorescence with antiactivated caspase-3. Terminal deoxynucleotidyl transferase-mediated dUTP nick end labeling (TUNEL) activity is measured with In Situ Cell Death Detection Kit. Both assays are analyzed on Acumen Explorer laser-scanning fluorescence microplate cytometer. Hematologic tumor cells are assayed for cell viability with CellTiter-Glo Luminescent Cell Viability Assay[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Mice and Rats[1]
For xenograft models, human cancer cells U87MG, MV-4-11, A375, and HCT116 are implanted into female nude rats or athymic nude female mice. The animals are dosed with saline, Rapamycin, or LY2857785, respectively. MV-4-11 xenografts in nude mice are treated by LY2857785 (4, 8, and 18 mg/kg) i.v. bolus. MV-4-11 xenografts in nude rats are treated with LY2857785 (3, 6, and 9 mg/kg) 4-hour i.v. infusion. An untreated vehicle control group is administered saline i.v. every 3 days. Flow cytometry analysis is conducted using Beckman Coulter's CXP software. Statistical significance of the effect of LY2857785 and/or control compounds is assessed by Dunnett method, one-way ANOVA.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureté et documentation
-
Fiche technique (278 KB)
-
SDS (396 KB)
- English - EN (396 KB)
- Français - FR (396 KB)
- Deutsch - DE (396 KB)
- Norwegian - NO (396 KB)
- Español - ES (396 KB)
- Swedish - SV (396 KB)
- Italian - IT (396 KB)
- Korean - KR (396 KB)
- Portuguese - PT (396 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2292 mL | 11.1458 mL | 22.2916 mL | 55.7289 mL |
| 5 mM | 0.4458 mL | 2.2292 mL | 4.4583 mL | 11.1458 mL | |
| 10 mM | 0.2229 mL | 1.1146 mL | 2.2292 mL | 5.5729 mL | |
| 15 mM | 0.1486 mL | 0.7431 mL | 1.4861 mL | 3.7153 mL | |
| 20 mM | 0.1115 mL | 0.5573 mL | 1.1146 mL | 2.7864 mL |
LY2857785 Related Classifications
HY-12293 Related Classifications
Powered by Bioz