AT6
Based on 1 Customer Validation
AT6 is a PROTAC AT1 analogue, which is a PROTAC connected by an E3 ligand for von Hippel-Lindau and a ligand for BRD4 with highly selectivity to bromodomain (Brd4).
(Pink: BRD4(BD1BD2) ligand (HY-13030); Blue: VHL ligand (HY-111823); Black: linker).
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit : 99.93%
- CAS. Nr.: 2098836-50-9
- Formel: C48H58ClN9O7S3
- Molecular Weight:1004.68
-
Speicherung:
-20°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
-
HY-107425
MZ 1PROTAC BRD4 Degrader -
HY-100972
ARV-771BET PROTAC Degrader -
HY-101838
dBET1PROTAC BRD4 Degrader -
HY-111433
BRD4 degrader AT1BRD4 PROTAC Degrader -
HY-112376
MZP-54BRD3/BRD4 PROTAC Degrader -
HY-112588
dBET6PROTAC BET Degrader -
HY-112495
VH032-PEG5-C6-ClE3 ligase ligand-Linker Conjugate -
HY-128359
ACBI1SMARCA2/SMARCA4/PBRM1 Degrader -
HY-111519
dTRIM24PROTAC TRIM24 Degrader -
HY-134582
dCBP-1PROTAC p300/CBP Degrader -
HY-123937
THAL-SNS-032CDK9 PROTAC Degrader -
HY-123921
Gefitinib-based PROTAC 3EGFR PROTAC Degrader
Alle PROTACs Isoform-spezifische Produkte anzeigen
More
Biologische Aktivität
Beschreibung
In Vitro
PROTACs (proteolysis-targeting chimaeras) are bifunctional molecules that recruit a target protein in proximity to an E3 ubiquitin ligase to trigger protein degradation. Structural elucidation of the key ternary ligase: PROTAC: target species and how this impacts target degradation selectivity remains elusive. The ligand folds into itself to allow formation of specific intermolecular interactions in the ternary complex. Isothermal titration calorimetry studies, supported by surface mutagenesis and proximity assays, are consistent with pronounced cooperative formation of ternary complexes with Brd4BD2. Structure-based-designed compound AT1 exhibits highly selective depletion of Brd4 in cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 2098836-50-9
-
Appearance Solid
-
Molecular Weight 1004.68
-
Formel C48H58ClN9O7S3
-
Color White to off-white
-
SMILES
CC1=C(C)C(C(C2=CC=C(Cl)C=C2)=N[C@@H](CC(NCCOCCOCCSC(C)(C)[C@H](NC(C)=O)C(N3C[C@H](O)C[C@H]3C(NCC4=CC=C(C5=C(C)N=CS5)C=C4)=O)=O)=O)C6=NN=C(C)N67)=C7S1
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
-20°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Lösungsmittel & Löslichkeit
In Vitro:
DMSO : 100 mg/mL (99.53 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (4.98 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (4.98 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (272 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 0.9953 mL | 4.9767 mL | 9.9534 mL | 24.8835 mL |
| 5 mM | 0.1991 mL | 0.9953 mL | 1.9907 mL | 4.9767 mL | |
| 10 mM | 0.0995 mL | 0.4977 mL | 0.9953 mL | 2.4884 mL | |
| 15 mM | 0.0664 mL | 0.3318 mL | 0.6636 mL | 1.6589 mL | |
| 20 mM | 0.0498 mL | 0.2488 mL | 0.4977 mL | 1.2442 mL | |
| 25 mM | 0.0398 mL | 0.1991 mL | 0.3981 mL | 0.9953 mL | |
| 30 mM | 0.0332 mL | 0.1659 mL | 0.3318 mL | 0.8295 mL | |
| 40 mM | 0.0249 mL | 0.1244 mL | 0.2488 mL | 0.6221 mL | |
| 50 mM | 0.0199 mL | 0.0995 mL | 0.1991 mL | 0.4977 mL | |
| 60 mM | 0.0166 mL | 0.0829 mL | 0.1659 mL | 0.4147 mL | |
| 80 mM | 0.0124 mL | 0.0622 mL | 0.1244 mL | 0.3110 mL |
AT6 Related Classifications
HY-112375 Related Classifications
Powered by Bioz