MT-125
Based on 1 Customer Validation
MT-125 is a specific and well-tolerated inhibitor of non-muscle myosin IIA (Ki,NMIIA = 2.7 μM) and IIB (EC50 = 1.7 μM). MT-125 can pass through the blood-brain barrier. MT-125 induces ferroptosis and DNA damage by increasing the levels of reactive oxygen species (ROS) within tumor cells. MT-125 can enhance the PDGFR signaling pathway. MT-125 can be used for research on glioblastoma.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit : 98.73%
- Formel: C22H20ClN3O2
- Molecular Weight:393.87
-
Speicherung:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Biologische Aktivität
Beschreibung
IC50 & Target
[1]|
PDGFRα |
In Vitro
MT-125 (5 μM, 8 h) significantly inhibits the invasive ability of one murine (MES1861) and three human (187, 190, and L1) Glioblastoma (GBM) cell lines[1].
MT-125 (5 μM, 48 h) leads to 12 %-25 % cell multinucleation in 10 human GBM cells[1].
MT-125 (0.1-10 μM; 96 h) produces over 90 % cytotoxicity in various mouse and human GBM cell lines[1].
MT-125 increase reactive oxygen species (ROS) and lipid peroxidation levels in L1 cells[1].
MT-125 (4 μM) can induce ferroptosis and ferroptosis inhibitors can reverse its cytotoxicity in Trp53(‒/‒) cells[1].
MT-125 (5 μM, 48 h) significantly increase PDGFRα expression and activation of downstream signaling pathways in Trp53(‒/‒) cells[1].
MT-125 (5 μM, 48 h) regulates the MAPK signaling pathway by inhibiting NMIIA in Trp53(‒/‒) cells[1].
MT-125 (5 μM, 48 h) exhibits synergistic effects with carcinogenic kinase inhibitors in Trp53(‒/‒) cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:murine (TRP53(-/-), Pten(-/-), TRP53/Pten(-/-)) and human (L1, L0, GBM1A, 612, QNS120, QNS166, QNS315) GBM cell lines
-
Concentration:3.3-7.3 μM
-
Incubation Time:96 h
-
Result:Significantly inhibited the GBM cell lines.
-
Cell Line:Trp53(‒/‒) cells
-
Concentration:5 μM
-
Incubation Time:48 h
-
Result:Effectively enhanced activation of PDGFRα, AKT, mTOR, ERK1/2, and SRC.
In Vivo
MT-125 (20 mg/kg, s.c.; once daily; for 7 days) does not cause any adverse effects related to medication and does not affect age-related weight changes in the C57BL/6 mice[1].
MT-125 (7.5, 15, or 30 mg/kg; s.c.; once daily; for 28 days) maintain good tolerability in repeated dose toxicology studies in the female rats[1].
MT-125 (10 mg/kg; i.p.; once daily; for 4 weeks) synergizes with oncogenic kinase inhibitors and can significantly inhibit the growth of tumor cells in the C57BL/6 mice with Trp53(‒/‒) tumors[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:C57BL/6 mice (8-10 weeks; 25-35 g)[1]
-
Dosage:10 mg/kg
-
Administration:Subcutaneous injection (s.c.); once daily for 2 weeks
-
Result:Had good tolerance and the weight and hematological indicators of mice were within normal range.
-
Animal Model:C57BL/6 mice (8-10 weeks; 25-35 g)[1]
-
Dosage:20 mg/kg
-
Administration:Subcutaneous injection (s.c.); once daily for 7 days
-
Result:Maintained normal body weight and hematological parameters within the normal range in mice.
-
Animal Model:Female rats (8-10 weeks; 25-35 g)[1]
-
Dosage:7.5, 15, or 30 mg/kg
-
Administration:Subcutaneous injection (s.c.); once daily for 28 days
-
Result:Did not cause any obvious or lasting adverse health effects.
-
Animal Model:C57BL/6 mice with Trp53(‒/‒) tumors (8-10 weeks; 25-35 g)[1]
-
Dosage:10 mg/kg, co-incubation with Paxalisib (HY-19962)
-
Administration:Intraperitoneal injection (i.p.); once daily for 4 weeks
-
Result:Markedly reduced tumor size to an isolated nest of HA-positive cells and prolonged survival rate.
Chemical Information
-
Appearance Solid
-
Molecular Weight 393.87
-
Formel C22H20ClN3O2
-
Color Off-white to light yellow
-
SMILES
CC1=CC2=C(N=C(N(C3=CC4=C(N=C(C)C=C4)C=C3)CC5)[C@]5(O)C2=O)C=C1.Cl
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Lösungsmittel & Löslichkeit
In Vitro:
DMSO : 100 mg/mL (253.89 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 4 mg/mL (10.16 mM); Clear solution
This protocol yields a clear solution of ≥ 4 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (40.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 4 mg/mL (10.16 mM); Clear solution
This protocol yields a clear solution of ≥ 4 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (40.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (285 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.5389 mL | 12.6945 mL | 25.3891 mL | 63.4727 mL |
| 5 mM | 0.5078 mL | 2.5389 mL | 5.0778 mL | 12.6945 mL | |
| 10 mM | 0.2539 mL | 1.2695 mL | 2.5389 mL | 6.3473 mL | |
| 15 mM | 0.1693 mL | 0.8463 mL | 1.6926 mL | 4.2315 mL | |
| 20 mM | 0.1269 mL | 0.6347 mL | 1.2695 mL | 3.1736 mL | |
| 25 mM | 0.1016 mL | 0.5078 mL | 1.0156 mL | 2.5389 mL | |
| 30 mM | 0.0846 mL | 0.4232 mL | 0.8463 mL | 2.1158 mL | |
| 40 mM | 0.0635 mL | 0.3174 mL | 0.6347 mL | 1.5868 mL | |
| 50 mM | 0.0508 mL | 0.2539 mL | 0.5078 mL | 1.2695 mL | |
| 60 mM | 0.0423 mL | 0.2116 mL | 0.4232 mL | 1.0579 mL | |
| 80 mM | 0.0317 mL | 0.1587 mL | 0.3174 mL | 0.7934 mL | |
| 100 mM | 0.0254 mL | 0.1269 mL | 0.2539 mL | 0.6347 mL |
MT-125 Related Classifications
HY-174406 Related Classifications
Powered by Bioz