MS33
Based on 1 Customer Validation
MS33 is a potent WDR5 degrader, with Kds of 870 nM and 120 nM for VCB and WDR5, respectively. MS33 induces WDR5 degradation in an E3 ligase VHL, and proteasome-dependent manner. MS33 can be used for the research of acute myeloid leukemia.
(Pink: WDR5 ligand (HY-141798); Blue: VHL ligand (HY-125845); Black: linker).
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.38%
- CAS. Nr.: 2407449-11-8
- Formel: C64H84F3N11O7S
- Molecular Weight:1208.48
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Alle Histone Methyltransferase Isoform-spezifische Produkte anzeigen
MoreAlle PROTACs Isoform-spezifische Produkte anzeigen
More
Biologische Aktivität
|
VHL |
WDR5 120 nM (Kd) |
VCB 870 nM (Kd) |
MS33 (0.05-5 μM; 18 h) induces WDR5 degradation in a concentration-dependent manner in MV4;11 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:MV4;11 cells
-
Concentration:0.05, 0.1, 0.5, 1, 5 μM
-
Incubation Time:1, 2, 4, 8, 16, 24 hours
-
Result:Concentration- and time-dependently induced WDR5 degradation.
The DC50 of MS33 was 260 nM, and the maximum degradation of 71%.
Chemical Information
-
CAS. Nr. 2407449-11-8
-
Appearance Solid
-
Molecular Weight 1208.48
-
Formel C64H84F3N11O7S
-
Color White to off-white
-
SMILES
CN(CC1)CCN1C(C(NC(C2=CNC(C=C2C(F)(F)F)=O)=O)=C3)=CC=C3C4=CC(CN5CCN(CCNC(CCCCCCCCCC(N[C@@H](C(C)(C)C)C(N6C[C@H](O)C[C@H]6C(NCC7=CC=C(C8=C(C)N=CS8)C=C7)=O)=O)=O)=O)CC5)=CC=C4
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (82.75 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (2.07 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (2.07 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (271 KB)
-
SDS (254 KB)
- English - EN (254 KB)
- Français - FR (254 KB)
- Deutsch - DE (254 KB)
- Norwegian - NO (254 KB)
- Español - ES (254 KB)
- Swedish - SV (254 KB)
- Italian - IT (254 KB)
- Korean - KR (254 KB)
- Portuguese - PT (254 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 0.8275 mL | 4.1374 mL | 8.2749 mL | 20.6871 mL |
| 5 mM | 0.1655 mL | 0.8275 mL | 1.6550 mL | 4.1374 mL | |
| 10 mM | 0.0827 mL | 0.4137 mL | 0.8275 mL | 2.0687 mL | |
| 15 mM | 0.0552 mL | 0.2758 mL | 0.5517 mL | 1.3791 mL | |
| 20 mM | 0.0414 mL | 0.2069 mL | 0.4137 mL | 1.0344 mL | |
| 25 mM | 0.0331 mL | 0.1655 mL | 0.3310 mL | 0.8275 mL | |
| 30 mM | 0.0276 mL | 0.1379 mL | 0.2758 mL | 0.6896 mL | |
| 40 mM | 0.0207 mL | 0.1034 mL | 0.2069 mL | 0.5172 mL | |
| 50 mM | 0.0165 mL | 0.0827 mL | 0.1655 mL | 0.4137 mL | |
| 60 mM | 0.0138 mL | 0.0690 mL | 0.1379 mL | 0.3448 mL | |
| 80 mM | 0.0103 mL | 0.0517 mL | 0.1034 mL | 0.2586 mL |
MS33 Related Classifications
HY-141797 Related Classifications
Powered by Bioz