A1874
Based on 2 publication(s) in Google Scholar
A1874 is a nutlin-based (MDM2 ligand) and BRD4-degrading PROTAC with a DC50 of 32 nM (induce BRD4 degradation in cells). Effective in inhibiting many cancer cell lines proliferation.
(Pink: BRD4 ligand (HY-13030); Blue: MDM-2/p53 ligand (HY-15676); Black: linker).
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.77%
- CAS No.: 2064292-12-0
- Formule: C58H62Cl3F2N9O7S
- Masse moléculaire:1173.59
-
Stockage:
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) A1874
MoreVoir tous les produits spécifiques à Isoform PROTACs
More
Activité biologique
|
BRD4 |
Treatment of HCT116 cells of A1874 (0-10 μM, 24 hours) induces a dose-dependent knockdown of BRD4 levels, with near-maximum knockdown by 100 nmol/L and a maximum degradation (Dmax) of BRD4 of 98% of the levels in control (0.1% DMSO-treated) cells[1].
Treatment of HCT116 cells of A1874 (0-10 μM, 24 hours) increases p53 levels in the HCT116 cells and showed dose-dependent p53 stabilization[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:HCT116 cells.
-
Concentration:0-10 μM.
-
Incubation Time:24 hours.
-
Result:Induced a dosedependent knockdown of BRD4 levels, with near-maximum knockdown by 100 nM.
Increased p53 levels and showed dose-dependent p53 stabilization.
Chemical Information
-
CAS No. 2064292-12-0
-
Appearance Solid
-
Masse moléculaire 1173.59
-
Formule C58H62Cl3F2N9O7S
-
Color White to off-white
-
SMILES
ClC(C=C1)=CC=C1C2=N[C@H](C3=NN=C(C)N3C4=C2C(C)=C(C)S4)CC(NCCOCCOCCOCCNC(C5=CC(OC)=C(NC([C@H]6[C@H](C7=C(F)C(Cl)=CC=C7)[C@](C8=CC=C(Cl)C=C8F)(C#N)[C@H](CC(C)(C)C)N6)=O)C=C5)=O)=O
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Structure
PROTAC-mediated activation, rather than degradation, of a nuclear receptor reveals complex ligand-receptor interaction network. [Abstract]2024 Dec 5;32(12):2352-2363.e8. PMID: 39389062 -
Solvant et solubilité
DMSO : 150 mg/mL (127.81 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (2.13 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (273 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 0.8521 mL | 4.2604 mL | 8.5209 mL | 21.3022 mL |
| 5 mM | 0.1704 mL | 0.8521 mL | 1.7042 mL | 4.2604 mL | |
| 10 mM | 0.0852 mL | 0.4260 mL | 0.8521 mL | 2.1302 mL | |
| 15 mM | 0.0568 mL | 0.2840 mL | 0.5681 mL | 1.4201 mL | |
| 20 mM | 0.0426 mL | 0.2130 mL | 0.4260 mL | 1.0651 mL | |
| 25 mM | 0.0341 mL | 0.1704 mL | 0.3408 mL | 0.8521 mL | |
| 30 mM | 0.0284 mL | 0.1420 mL | 0.2840 mL | 0.7101 mL | |
| 40 mM | 0.0213 mL | 0.1065 mL | 0.2130 mL | 0.5326 mL | |
| 50 mM | 0.0170 mL | 0.0852 mL | 0.1704 mL | 0.4260 mL | |
| 60 mM | 0.0142 mL | 0.0710 mL | 0.1420 mL | 0.3550 mL | |
| 80 mM | 0.0107 mL | 0.0533 mL | 0.1065 mL | 0.2663 mL | |
| 100 mM | 0.0085 mL | 0.0426 mL | 0.0852 mL | 0.2130 mL |
Powered by Bioz