PP121
Based on 4 publication(s) in Google Scholar
PP121 is a multi-targeted kinase inhibitor with IC50s of 10, 60, 12, 14, 2 nM for mTOR, DNK-PK, VEGFR2, Src, PDGFR, respectively.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.51%
- CAS No.: 1092788-83-4
- Formule: C17H17N7
- Masse moléculaire:319.36
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Protocole
- Pureté et documentation
- Références
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) PP121
MoreVoir tous les produits spécifiques à Isoform VEGFR
More
Activité biologique
|
mTOR 10 nM (IC50) |
PDGFR 2 nM (IC50) |
VEGFR2 12 nM (IC50) |
Src 14 nM (IC50) |
DNK-PK 60 nM (IC50) |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HUVEC | IC50 |
0.31 nM
Compound: PP121
|
Antiangiogenic activity against HUVEC after 24 hrs by calcein AM staining-based fluorescent microscopy
Antiangiogenic activity against HUVEC after 24 hrs by calcein AM staining-based fluorescent microscopy
|
[PMID: 18849971] |
| TT | IC50 |
50 nM
Compound: PP121
|
Antiproliferative activity against human TT cells after 13 days by fluorescence assay
Antiproliferative activity against human TT cells after 13 days by fluorescence assay
|
[PMID: 18849971] |
PP121 blocks the PI3K pathway by direct inhibition of PI3K/mTOR in two glioblastoma cell lines, U87 and LN229. PP121 potently inhibits the proliferation of a diverse panel of tumor cell lines containing mutations in the PI3-K pathway components PIK3CA, PTEN, or RAS. PP121 induces a G0G1 arrest in most tumor cells. PP121 directly inhibits Src in cells and reverses its biochemical and morphological effects. PP121 potently inhibits the Ret kinase domain in vitro (IC50<1 nM). PP121 potently blocks VEGF stimulated activation of the PI3-K and MAPK pathways. PP121 inhibits VEGFR2 autophosphorylation at low nanomolar concentrations, confirming that this molecule directly targets VEGFR2 in cells. PP121 inhibits Bcr-Abl induced tyrosine phosphorylation in K562 cells as well as BaF3 cells that express Bcr-Abl[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1092788-83-4
-
Appearance Solid
-
Masse moléculaire 319.36
-
Formule C17H17N7
-
Color White to off-white
-
SMILES
NC1=C2C(C3=CC4=C(N=C3)NC=C4)=NN(C2=NC=N1)C5CCCC5
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (4)
-
Journal Impact Factor
-
Most Recent
-
Sci Signal
A drug that induces the microRNA miR-124 enables differentiation of retinoic acid-resistant neuroblastoma cells. [Abstract]2025 Apr 15;18(882):eads2641. PMID: 40233178 -
Front Pharmacol
CC-223, NSC781406, and BGT226 Exerts a Cytotoxic Effect Against Pancreatic Cancer Cells via mTOR Signaling. [Abstract]2020 Nov 11:11:580407. PMID: 33343350 -
Molecules
In Vitro and in Vivo Activity of mTOR Kinase and PI3K Inhibitors Against Leishmania donovani and Trypanosoma brucei. [Abstract]2020 Apr 23;25(8):1980. PMID: 32340370 -
bioRxiv
Novel miRNA-inducing drugs enable differentiation of retinoic acid-resistant neuroblastoma cells. [Abstract]2024 Jul 29:2024.06.05.597584. PMID: 38895399
Solvant et solubilité
DMSO : 20 mg/mL (62.63 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2 mg/mL (6.26 mM); Clear solution
This protocol yields a clear solution of ≥ 2 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2 mg/mL (6.26 mM); Clear solution
This protocol yields a clear solution of ≥ 2 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocole
Purified kinase domains are incubated with inhibitors (PP121) at 2- or 4-fold dilutions over a concentration range of 50- 0.001 µM or with vehicle (0.1% DMSO) in the presence of 10 µM ATP, 2.5 µCi of γ- 32P-ATP and substrate. Reactions are terminated by spotting onto nitrocellulose or phosphocellulose membranes, depending on the substrate; this membrane is then washed 5-6 times to remove unbound radioactivity and dried. Transferred radioactivity is quantitated by phosphorimaging and IC50 values are calculated by fitting the data to a sigmoidal doseresponse using Prism software[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Cells grown in 96-well plates are treated with PP121 at 4-fold dilutions (10 µM - 0.040 μM) or vehicle (0.1% DMSO). After 72 h cells are exposed to Resazurin sodium salt (22 µM) and fluorescence is quantified. IC50 values are calculated. For proliferation assays involving single cell counting, non-adherent cells are plated at low density (3–5% confluence) and treated with drug (2.5 µM) or vehicle (0.1% DMSO). Cells are diluted into trypan blue daily and viable cells counted using a hemocytometer[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Mice: Eca-109 cells are injected into the axillary regions of nude mice (5×106 cells/mouse). When the tumor volumes reach around 200 mm3, the mice are randomly separated to three groups: Untreated control, PP121 (30 mg/kg) and vehicle (10% 1-methyl-2-pyrrolidinone and 90% PEG 300) group. Tumor volumes and the mice body weights are measured every 10 d[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureté et documentation
-
Fiche technique (283 KB)
-
SDS (479 KB)
- English - EN (479 KB)
- Français - FR (479 KB)
- Deutsch - DE (479 KB)
- Norwegian - NO (479 KB)
- Español - ES (479 KB)
- Swedish - SV (479 KB)
- Italian - IT (479 KB)
- Korean - KR (479 KB)
- Portuguese - PT (479 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Apsel B, et al. Targeted polypharmacology: discovery of dual inhibitors of tyrosine and phosphoinositide kinases. Nat Chem Biol, 2008, 4(11), 691-699. [Content Brief]
[2]. Peng Y, et al. The anti-esophageal cancer cell activity by a novel tyrosine/phosphoinositide kinase inhibitor PP121. Biochem Biophys Res Commun. 2015 Sep 11;465(1):137-44. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.1313 mL | 15.6563 mL | 31.3126 mL | 78.2816 mL |
| 5 mM | 0.6263 mL | 3.1313 mL | 6.2625 mL | 15.6563 mL | |
| 10 mM | 0.3131 mL | 1.5656 mL | 3.1313 mL | 7.8282 mL | |
| 15 mM | 0.2088 mL | 1.0438 mL | 2.0875 mL | 5.2188 mL | |
| 20 mM | 0.1566 mL | 0.7828 mL | 1.5656 mL | 3.9141 mL | |
| 25 mM | 0.1253 mL | 0.6263 mL | 1.2525 mL | 3.1313 mL | |
| 30 mM | 0.1044 mL | 0.5219 mL | 1.0438 mL | 2.6094 mL | |
| 40 mM | 0.0783 mL | 0.3914 mL | 0.7828 mL | 1.9570 mL | |
| 50 mM | 0.0626 mL | 0.3131 mL | 0.6263 mL | 1.5656 mL | |
| 60 mM | 0.0522 mL | 0.2609 mL | 0.5219 mL | 1.3047 mL |
PP121 Related Classifications
HY-10372 Related Classifications
Powered by Bioz