PCIP-1
Based on 1 Customer Validation
PCIP-1 is a PARP2 inhibitor. PCIP-1 recruits BET proteins to PARP2 to inhibit DNA repair, acts via event-driven pharmacology, and does not inhibit PARP-catalyzed PARylation. PCIP-1 inhibits DNA repair, thereby inducing synthetic lethality in homologous recombination-deficient cancer cells and increasing the sensitivity of PARP1-knockout cells. PCIP-1 can be used in the research of homologous recombination-deficient cancers, T-cell acute lymphoblastic leukemia, and BRCA-mutant cancers.
For research use only. We do not sell to patients.
- Purity: 98.80%
- Formula: C45H46ClFN8O3S
- Molecular Weight:833.41
-
Storage:
4°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Biological Activity
|
PARP2 |
BET |
PCIP-1 induces formation of a ternary complex between BRD4 bromodomain 1 and PARP1 catalytic domain in vitro, as measured by HTRF signal[1].
PCIP-1 (Up to 50 µM; 2 h pre-incubation with PCIP-1, followed by 45 min incubation with dBET6) shows weak, non-saturating engagement of BRD4 in Jurkat-BRD4-HiBit cells, with an EC50 of 26 µM, and its anti-proliferative activity is not driven by occupancy-based BRD4 inhibition[1].
PCIP-1 (1 nM-100 μM; 72 h) potently inhibits Jurkat T-cell viability with an IC50 of 662 nM, and its activity is enhanced over 14-fold (IC50 = 45 nM) in the presence of the DNA-damaging agent MMS[1].
PCIP-1 (1 µM; 4 h) induces proximity between BET proteins (BRD4) and PARP1/2 in 22Rv1 cells, as shown by increased co-immunoprecipitation of these protein pairs[1].
PCIP-1 (100 nM-10 µM; 24 h) inhibits repair of MMS-induced DNA damage and induces apoptosis in Jurkat cells, without inhibiting global PARP-catalyzed PARylation[1].
PCIP-1 (100 nM-1 µM; 24 h) induces S-phase cell cycle arrest in Jurkat cells, consistent with inhibition of DNA damage repair[1].
PCIP-1 (1 µM; up to 14 days) reduces the competitive fitness of PARP2-proficient Jurkat-Cas9 cells, such that PARP2-deficient cells are selectively enriched, demonstrating PARP2 dependence of PCIP-1 activity[1].
PCIP-1 (0.1 nM-10 μM; 6 days) exhibits synthetic lethality with BRCA2 deficiency in DLD1 colon cancer cells, with BRCA2K/O cells showing over 100-fold greater sensitivity than parental cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Jurkat T-cell acute lymphoblastic leukemia (T-ALL) cells
-
Concentration:1 nM, 10 nM, 100 nM, 1 μM, 10 μM, 100 μM
-
Incubation Time:72 h
-
Result:Inhibited Jurkat cell viability with an IC50 of 662 nM.
Improved the IC50 to 45 nM in the presence of 25 µM methyl methanesulfonate (MMS).
-
Cell Line:Jurkat T-cell acute lymphoblastic leukemia (T-ALL) cells
-
Concentration:100 nM-10 µM (24 h incubation); 1 µM (time-course incubation)
-
Incubation Time:24 h (dose-response); 12, 16, 24 h (time-course)
-
Result:Induced accumulation of the DNA damage marker γH2AX, especially with MMS.
Caused dose-responsive and time-dependent increases in cleaved PARP1/2 and cleaved Caspase 3.
Showed minimal effects on global PARylation levels.
-
Cell Line:Jurkat T-cell acute lymphoblastic leukemia (T-ALL) cells
-
Concentration:100 nM, 1 µM
-
Incubation Time:24 h
-
Result:Induced a strong S-phase arrest.
Chemical Information
-
Appearance Solid
-
Molecular Weight 833.41
-
Formula C45H46ClFN8O3S
-
Color Off-white to light yellow
-
SMILES
O=C(NCC1)C2=CC(F)=CC3=C2C1=C(N3)C4=CC=C(NC(CCCCCCCCNC(C[C@@H]5N=C(C6=CC=C(Cl)C=C6)C(C(C)=C(C)S7)=C7N8C5=NN=C8C)=O)=O)C=C4
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Solvent & Solubility
DMSO : 100 mg/mL (119.99 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Purity & Documentation
-
Data Sheet (273 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.1999 mL | 5.9994 mL | 11.9989 mL | 29.9972 mL |
| 5 mM | 0.2400 mL | 1.1999 mL | 2.3998 mL | 5.9994 mL | |
| 10 mM | 0.1200 mL | 0.5999 mL | 1.1999 mL | 2.9997 mL | |
| 15 mM | 0.0800 mL | 0.4000 mL | 0.7999 mL | 1.9998 mL | |
| 20 mM | 0.0600 mL | 0.3000 mL | 0.5999 mL | 1.4999 mL | |
| 25 mM | 0.0480 mL | 0.2400 mL | 0.4800 mL | 1.1999 mL | |
| 30 mM | 0.0400 mL | 0.2000 mL | 0.4000 mL | 0.9999 mL | |
| 40 mM | 0.0300 mL | 0.1500 mL | 0.3000 mL | 0.7499 mL | |
| 50 mM | 0.0240 mL | 0.1200 mL | 0.2400 mL | 0.5999 mL | |
| 60 mM | 0.0200 mL | 0.1000 mL | 0.2000 mL | 0.5000 mL | |
| 80 mM | 0.0150 mL | 0.0750 mL | 0.1500 mL | 0.3750 mL | |
| 100 mM | 0.0120 mL | 0.0600 mL | 0.1200 mL | 0.3000 mL |