RP-182
Based on 1 Customer Validation
RP-182 is a synthetic immunomodulatory peptide that exerts anti-tumor effects by targeting the mannose receptor CD206 (Kd = 8 μM) on the surface of tumor-associated macrophages (TAMs). RP-182 induces a conformational switch of the CD206 receptor, which activates NF-κB signaling and phagocytosis in CD206high TAMs. RP-182 has dual function: activation of canonical NF-κB signaling, triggering TNFα secretion and autocrine activation of the TNF receptor 1 (TNFR1), leading to activation of caspase 8, apoptosis, and cell death. RP-182 is used in pancreatic cancer and melanoma research.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.68%
- CAS. Nr.: 1895883-60-9
- Formel: C69H103N19O11
- Molecular Weight:1374.68
-
Speicherung:
Sealed storage, away from moisture.
Powder -80°C, 2 years , -20°C, 1 year* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Alle TNF Receptor Isoform-spezifische Produkte anzeigen
MoreAlle Caspase Isoform-spezifische Produkte anzeigen
More
Biologische Aktivität
|
Caspase-8 |
NF-κB |
RP-182 (1 nM-1 mM, 48 h) increases cell killing of CD206high M2-like macrophages with an IC50 of 17.6 μM through the MyD88/NF-κB pathway[1][2].
RP-182 (0.1 μM, 2-24 h) internalizes CD206, activated NF-κB, and increased IRF7 phosphorylation in IL-4-polarized M2 bone marrow-derived macrophages[1][2].
RP-182 (3-30 μM, 24 h) increases levels of inflammatory factors secreted by macrophages, indicating immune reprogramming[1][2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Macrophages
-
Concentration:3, 10 and 30 μM
-
Incubation Time:24 h
-
Result:Increased the levels of TNFα and IFNγ.
RP-182 (20 mg/kg, i.p., once daily for 18 days) significantly alleviates pulmonary fibrosis in mice[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:B16 melanoma allograft and KP16 pancreatic model established in eight- to twelve-week old C57B/L6 mice[1]
-
Dosage:20 mg/kg
-
Administration:Intraperitoneal injection (i.p.), every other day for 2 weeks
-
Result:Inhibited tumor growth and prolonged median survival in mice
Increased CD8+ T cell infiltration.
Significantly increased IFN-γ secretion by CD8+ T cells in tumors.
-
Animal Model:Bleomycin (HY-108345) induced pulmonary fibrosis model established in BALB/c mice[2]
-
Dosage:20 mg/kg
-
Administration:Intraperitoneal injection (i.p.), once daily for 18 days
-
Result:Prolonged survival and reduced pulmonary fibrosis in mice.
Reduced CD206+ alveolar macrophages.
Chemical Information
-
CAS. Nr. 1895883-60-9
-
Appearance Solid
-
Molecular Weight 1374.68
-
Formel C69H103N19O11
-
Color White to off-white
-
Sequence
Lys-Phe-Arg-Lys-Ala-Phe-Lys-Arg-Phe-Phe
-
Sequence Shortening
KFRKAFKRFF
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Sealed storage, away from moisture
Powder -80°C 2 years -20°C 1 year * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (72.74 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (1.82 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (1.82 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (278 KB)
-
SDS (254 KB)
- English - EN (254 KB)
- Français - FR (254 KB)
- Deutsch - DE (254 KB)
- Norwegian - NO (254 KB)
- Español - ES (254 KB)
- Swedish - SV (254 KB)
- Italian - IT (254 KB)
- Korean - KR (254 KB)
- Portuguese - PT (254 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 0.7274 mL | 3.6372 mL | 7.2744 mL | 18.1860 mL |
| 5 mM | 0.1455 mL | 0.7274 mL | 1.4549 mL | 3.6372 mL | |
| 10 mM | 0.0727 mL | 0.3637 mL | 0.7274 mL | 1.8186 mL | |
| 15 mM | 0.0485 mL | 0.2425 mL | 0.4850 mL | 1.2124 mL | |
| 20 mM | 0.0364 mL | 0.1819 mL | 0.3637 mL | 0.9093 mL | |
| 25 mM | 0.0291 mL | 0.1455 mL | 0.2910 mL | 0.7274 mL | |
| 30 mM | 0.0242 mL | 0.1212 mL | 0.2425 mL | 0.6062 mL | |
| 40 mM | 0.0182 mL | 0.0909 mL | 0.1819 mL | 0.4547 mL | |
| 50 mM | 0.0145 mL | 0.0727 mL | 0.1455 mL | 0.3637 mL | |
| 60 mM | 0.0121 mL | 0.0606 mL | 0.1212 mL | 0.3031 mL |