BETd-260
Based on 4 publication(s) in Google Scholar
BETd-260 (ZBC 260) is a PROTAC connected by ligands for Cereblon and BET, with as low as 30 pM against BRD4 protein in RS4;11 leukemia cell line. BETd-260 potently suppresses cell viability and robustly induces apoptosis in hepatocellular carcinoma (HCC) cells.
(Pink: BET ligand (HY-112429); Blue: Cereblon ligand (HY-43722); Black: linker).
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.68%
- CAS No.: 2093388-62-4
- Formule: C43H46N10O6
- Masse moléculaire:798.89
-
Stockage:
-80°C, protect from light, stored under nitrogen
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Protocole
- Pureté et documentation
- Références
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) BETd-260
MoreVoir tous les produits spécifiques à Isoform PROTACs
More
Activité biologique
|
BRD4 <30 pM (IC50) |
BRD2 30-100 pM (IC50) |
BRD3 30-100 pM (IC50) |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| MOLM-13 | IC50 |
2.2 nM
Compound: 23
|
Cytotoxicity against human MOLM13 cells assessed as cell growth inhibition after 4 days by WST-8 assay
Cytotoxicity against human MOLM13 cells assessed as cell growth inhibition after 4 days by WST-8 assay
|
[PMID: 28339196] |
| RS4-11 | IC50 |
0.051 nM
Compound: 23
|
Cytotoxicity against human RS4:11 cells assessed as cell growth inhibition after 4 days by WST-8 assay
Cytotoxicity against human RS4:11 cells assessed as cell growth inhibition after 4 days by WST-8 assay
|
[PMID: 28339196] |
BETd-260 (ZBC260; Compound 23) is capable of inducing degradation of BRD2, BRD3, and BRD4 proteins at 30–100 pM in the RS4;11 leukemia cells. BETd-260 shows inhibitory activity against the growth of RS4;11 leukemia cells and MOLM-13 cells with IC50s of 51 pM and 2.2 nM, respectively, and induces apoptosis in both RS4;11 and MOLM-13 cell lines at 3-10 nM[1].
BETd-260 reciprocally modulates the expression of several apoptotic genes in HCC cells, i.e., suppressing the expression of anti-apoptotic Mcl-1, Bcl-2, c-Myc, and XIAP, whereas increasing the expression of pro-apoptotic Bad[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2093388-62-4
-
Appearance Solid
-
Masse moléculaire 798.89
-
Formule C43H46N10O6
-
Color Off-white to yellow
-
SMILES
CCN1N=C(C2CC2)C=C1NC3=NC(C(NCCCCCC4=CC=CC5=C4CN(C6C(NC(CC6)=O)=O)C5=O)=O)=NC7=C3C8=CC(OC)=C(C9=C(C)ON=C9C)C=C8N7
-
Synonyms
ZBC 260
-
Livraison
Shipping with dry ice.
-
Stockage
-80°C, protect from light, stored under nitrogen
Publications (4)
-
Journal Impact Factor
-
Most Recent
-
PLoS Biol
The cell cycle regulator PLK1 promotes murine melanoma progression by regulating the transcription factor BACH1. [Abstract]2025 Nov 24;23(11):e3003490. PMID: 41284701 -
Structure
PROTAC-mediated activation, rather than degradation, of a nuclear receptor reveals complex ligand-receptor interaction network. [Abstract]2024 Dec 5;32(12):2352-2363.e8. PMID: 39389062 -
ACS Pharmacol Transl Sci
Developing MYC Degraders Bearing the Von Hippel-Lindau Ligand to Target the "Undruggable" MYC. [Abstract]2024 Nov 15;7(12):3955-3968. PMID: 39698270 -
Solvant et solubilité
DMSO : 25 mg/mL (31.29 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 0.83 mg/mL (1.04 mM); Clear solution
This protocol yields a clear solution of ≥ 0.83 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (8.3 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocole
In cell growth experiments, cells are seeded in 96-well cell culture plates at a density of 10000−20000 cells/well in 100 μL of culture medium. BETd-260 is serially diluted in the appropriate medium, and 100 μL of the diluted solution containing BETd-260 is added to the appropriate wells of the cell plate. After addition of BETd-260, the cells are incubated for 4 days at 37°C in an atmosphere of 5% CO2. Cell growth is evaluated by a lactate dehydrogenase-based WST-8 assay using a multimode microplate reader. The WST-8 reagent is added to the plate, incubated for at least 1 h, and read at 450 nm. The readings are normalized to the DMSO-treated cells, and the IC50 is calculated by nonlinear regression analysis using GraphPad Prism 6 software[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Mice[1]
To develop xenograft tumors, 5 × 106 RS4;11 cells with 50% Matrigel are injected subcutaneously on the dorsal side of severe combined immunodeficient (SCID) mice, one tumor per mouse. When tumors reach appr 100 mm3, mice are randomly assigned to BETd-260 treatment and vehicle control groups. Animals are monitored daily for any signs of toxicity and weighed 2-3 times per week during the treatment and weighed at least weekly after BETd-260 treatment end. Tumor size is measured 2-3 times per week by electronic calipers during the treatment period and at least weekly after the treatment is end. Tumor volume is calculated as V = LW2/2, where L is the length and W is the width of the tumor[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureté et documentation
-
Fiche technique (279 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Zhou B, et al. Discovery of a Small-Molecule Degrader of Bromodomain and Extra-Terminal (BET) Proteins with Picomolar Cellular Potencies and Capable of Achieving Tumor Regression. J Med Chem. 2018 Jan 25;61(2):462-481. [Content Brief]
[2]. Zhang H, et al. Targeting BET Proteins With a PROTAC Molecule Elicits Potent Anticancer Activity in HCC Cells. Front Oncol. 2020;9:1471. Published 2020 Jan 14. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.2517 mL | 6.2587 mL | 12.5174 mL | 31.2934 mL |
| 5 mM | 0.2503 mL | 1.2517 mL | 2.5035 mL | 6.2587 mL | |
| 10 mM | 0.1252 mL | 0.6259 mL | 1.2517 mL | 3.1293 mL | |
| 15 mM | 0.0834 mL | 0.4172 mL | 0.8345 mL | 2.0862 mL | |
| 20 mM | 0.0626 mL | 0.3129 mL | 0.6259 mL | 1.5647 mL | |
| 25 mM | 0.0501 mL | 0.2503 mL | 0.5007 mL | 1.2517 mL | |
| 30 mM | 0.0417 mL | 0.2086 mL | 0.4172 mL | 1.0431 mL |
BETd-260 Related Classifications
HY-101519 Related Classifications
Powered by Bioz