Loureirin D
Based on 1 Customer Validation
Loureirin D is a selective P2Y12 receptor antagonist that penetrates the blood-brain barrier. Loureirin D inhibits the MAPK/JNK/ERK/p38 signaling pathway in microglia by acting on CD38, and inhibits ADP (HY-W010918)-induced platelet aggregation, MMP2/9-mediated tight junction disruption, and ischemia-related blood-brain barrier damage. Loureirin D protects endothelial cells from OGD-induced apoptosis. Loureirin D is used in studies of ischemic stroke and thrombosis.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza : 99.30%
- No. CAS: 119425-91-1
- Fòrmula: C16H16O5
- Peso molecular:288.30
-
Almacenamiento:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Protocolo
- Pureza y Documentación
- Referencias
-
Help & FAQs
Ver todos los productos específicos de isoformas P2Y Receptor
More
Actividad biológica
Descripciòn
In Vitro
Loureirin D inhibits the MAPK signaling pathway in BV2 microglia and mediates endothelial barrier protection in a CD38-dependent manner, and CD38 is an essential upstream mediator of its inhibition of microglial activation[1].
Loureirin D (10-20 μM) attenuates the secretion of MMP2 and MMP9 from OGD-activated BV2 microglia[1].
Loureirin D maintains endothelial tight junction integrity by inhibiting pro-inflammatory microglial activation in the BV2-bEnd.3 co-culture system[1].
Loureirin D (compound 17) (100 ns) forms a stable complex with the P2Y12 receptor and maintains stable intermolecular interactions throughout the 100 ns molecular dynamics simulation[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Parmacokinetics
| Species | Dose | Route | AUC0-t | AUC0-∞ | MRT0-t | MRT0-∞ | T1/2 (Elimination) | CLz/F | Vz/F | Cmax | Bioavailability |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Rat[3] | 1 mg/kg | i.v. | 2074.7 ng·h/mL | 2096.8 ng·h/mL | 3.5 h | 3.7 h | 3.3 h | 0.5 L/h/kg | 2.3 L/kg | 924.4 ng/mL | / |
| Rat[3] | 5 mg/kg | p.o. | 563.4 ng·h/mL | 572.6 ng·h/mL | 4.2 h | 4.8 h | 4.2 h | 8.8 L/h/kg | 52.7 L/kg | 222.2 ng/mL | 5.4 % |
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Sprague-Dawley (SD) (Male; 260-280 g)[1]
-
Dosage:12 mg/kg/day; 24 mg/kg/day
-
Administration:i.g.; once daily; 3 consecutive days
-
Result:Ameliorated pMCAO-induced behavioral deficits, including reduced average locomotor velocity and total distance moved in the OFT, and markedly prolonged latency to fall in the rotarod test at 24 mg/kg.
Attenuated elevated Bederson neurological deficit scores at 24 mg/kg.
Mitigated histopathological changes and preserved neuronal density and morphological integrity in the hippocampal CA2 region.
Attenuated Evans blue leakage and brain water content in the ipsilateral ischemic hemisphere.
Markedly attenuated IgG extravasation.
Restored the expression of ZO-1 and Occludin and significantly attenuated the upregulation of MMP2 and MMP9.
Identified 99 DEGs commonly dysregulated in both "Model vs. Sham" and "This compound vs. Model" comparisons.
Significantly inhibited the mRNA expression of CD38 and Mapk11 in brain tissues.
Significantly attenuated CD38 protein expression.
Markedly attenuated CD38 signal intensity specifically within IBA-1-positive microglial cells.
-
Animal Model:Mice (male, 20-25 g)[2]
-
Dosage:6, 12, 24 mg/kg
-
Administration:i.g.; once daily; 3 days
-
Result:Ameliorated neurological deficits and improved motor function at 24 mg/kg.
Dose-dependently preserved BBB integrity with significant reduction in dye leakage.
Significantly inhibited platelet aggregation.
Significantly reduced P2Y12 protein levels in brain tissue and downregulated P2Y12 mRNA in cortical tissue.
Chemical Information
-
No. CAS 119425-91-1
-
Appearance Solid
-
Peso molecular 288.30
-
Fòrmula C16H16O5
-
Color White to pink
-
SMILES
O=C(C1=CC=C(O)C=C1)CCC2=C(OC)C=C(O)C=C2O
-
Structure Classification
-
Initial Source
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvente y solubilidad
In Vitro:
DMSO : ≥ 50 mg/mL (173.43 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (8.67 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (8.67 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (285 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.4686 mL | 17.3430 mL | 34.6861 mL | 86.7152 mL |
| 5 mM | 0.6937 mL | 3.4686 mL | 6.9372 mL | 17.3430 mL | |
| 10 mM | 0.3469 mL | 1.7343 mL | 3.4686 mL | 8.6715 mL | |
| 15 mM | 0.2312 mL | 1.1562 mL | 2.3124 mL | 5.7810 mL | |
| 20 mM | 0.1734 mL | 0.8672 mL | 1.7343 mL | 4.3358 mL | |
| 25 mM | 0.1387 mL | 0.6937 mL | 1.3874 mL | 3.4686 mL | |
| 30 mM | 0.1156 mL | 0.5781 mL | 1.1562 mL | 2.8905 mL | |
| 40 mM | 0.0867 mL | 0.4336 mL | 0.8672 mL | 2.1679 mL | |
| 50 mM | 0.0694 mL | 0.3469 mL | 0.6937 mL | 1.7343 mL | |
| 60 mM | 0.0578 mL | 0.2891 mL | 0.5781 mL | 1.4453 mL | |
| 80 mM | 0.0434 mL | 0.2168 mL | 0.4336 mL | 1.0839 mL | |
| 100 mM | 0.0347 mL | 0.1734 mL | 0.3469 mL | 0.8672 mL |
Loureirin D Related Classifications
HY-N8189 Related Classifications
Powered by Bioz