Ironomycin
Based on 1 Customer Validation
Ironomycin is a derivative of Salinomycin (HY-15597). Ironomycin exhibits selective inhibitory activity against mantle cell lymphoma (MCL) cells. Ironomycin blocks the cell cycle and induces apoptosis and ferroptosis. Ironomycin induces double-strand DNA breaks and activates the unfolded protein response (UPR), particularly the IRE1α signaling pathway accumulation. The combination of Ironomycin with Ibrutinib (HY-10997) shows a synergistic effect. Ironomycin can be used for the study of MCL.
For research use only. We do not sell to patients.
- Purity: 99.85%
- CAS No.: 1884647-72-6
- Formula: C45H73NO10
- Molecular Weight:788.06
-
Storage:
-20°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Apoptosis Compound Library
HY-L003
-
Cell Cycle/DNA Damage Compound Library
HY-L004
-
Kinase Inhibitor Library
HY-L009
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Aging Compound Library
HY-L034
-
Ferroptosis Compound Library
HY-L051
-
Endoplasmic Reticulum Stress Compound Library
HY-L054
-
Pyroptosis Compound Library
HY-L059
-
Anti-Breast Cancer Compound Library
HY-L074
-
Anti-Pancreatic Cancer Compound Library
HY-L077
-
Anti-Blood Cancer Compound Library
HY-L079
-
Cancer Stem Cells Compound Library
HY-L135
-
Highly Selective Inhibitors Library
HY-L158
-
Highly Selective Activators Library
HY-L159
-
Cell Death Library
HY-L162
-
Serine/Threonine Kinase Inhibitor Library
HY-L164
-
Anti-Hematopathy Compound Library
HY-L171
-
Anti-Ovarian Cancer Compound Library
HY-L173
-
Multi-Target Compound Library
HY-L176
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Anti-Brain Cancer Compound Library
HY-L188
-
Protein Kinase Compound Library
HY-L196
-
Non-Alcoholic Fatty Liver Disease (NAFLD) Compound Library
HY-L199
-
Cell Proliferation Compound Library
HY-L201
-
High-Throughput Bioactive Compound Library
HY-L205
-
High-Efficiency Gene Editing Compound Library
HY-L244
-
Alkyne Compound Library
HY-L258
Biological Activity
|
CDK4/cyclin D2 |
Cdk4/cyclin D1 |
Caspase 3 |
Caspase 8 |
Caspase 9 |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HL-60 | GI50 |
10.5 μM
Compound: 16
|
Cytotoxicity against human HL60 cells assessed as growth inhibition after 24 hrs by resazurin dye based assay
Cytotoxicity against human HL60 cells assessed as growth inhibition after 24 hrs by resazurin dye based assay
|
[PMID: 30986574] |
Chemical Information
-
CAS No. 1884647-72-6
-
Appearance Solid
-
Molecular Weight 788.06
-
Formula C45H73NO10
-
Color White to off-white
-
SMILES
C#CCN[C@H]1[C@@]2(O[C@@](CC2)([C@]3([H])O[C@H]([C@](O)(CC3)CC)C)C)O[C@]4(C=C1)O[C@]([C@H](C[C@H]4C)C)([H])[C@@H](CC)C([C@@H](C)[C@@H](O)[C@@H]([C@]5([H])O[C@@](CC[C@@H]5C)([H])[C@@H](CC)C(O)=O)C)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
-20°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Solvent & Solubility
DMSO : 50 mg/mL (63.45 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (3.17 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (278 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
[1]. Antoszczak M, et al. Rapid Access to Ironomycin Derivatives by Click Chemistry. ACS Org Inorg Au. 2022 Jun 1;2(3):222-228. [Content Brief]
[2]. Ovejero S, et al. Ironomycin induces mantle cell lymphoma cell death by targeting iron metabolism addiction. Theranostics. 2025 Feb 3;15(7):2834-2851. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.2689 mL | 6.3447 mL | 12.6894 mL | 31.7235 mL |
| 5 mM | 0.2538 mL | 1.2689 mL | 2.5379 mL | 6.3447 mL | |
| 10 mM | 0.1269 mL | 0.6345 mL | 1.2689 mL | 3.1723 mL | |
| 15 mM | 0.0846 mL | 0.4230 mL | 0.8460 mL | 2.1149 mL | |
| 20 mM | 0.0634 mL | 0.3172 mL | 0.6345 mL | 1.5862 mL | |
| 25 mM | 0.0508 mL | 0.2538 mL | 0.5076 mL | 1.2689 mL | |
| 30 mM | 0.0423 mL | 0.2115 mL | 0.4230 mL | 1.0574 mL | |
| 40 mM | 0.0317 mL | 0.1586 mL | 0.3172 mL | 0.7931 mL | |
| 50 mM | 0.0254 mL | 0.1269 mL | 0.2538 mL | 0.6345 mL | |
| 60 mM | 0.0211 mL | 0.1057 mL | 0.2115 mL | 0.5287 mL |
Powered by Bioz