Pexmetinib
Based on 2 publication(s) in Google Scholar
Pexmetinib is a potent Tie-2 and p38 MAPK dual inhibitor, with IC50s of 1 nM, 35 nM and 26 nM for Tie-2, p38α and p38β, respectively, and can be used in the research of acute myeloid leukemia.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 99.81%
- CAS No.: 945614-12-0
- 화학식: C31H33FN6O3
- 분자량:556.63
-
보관:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
Publications Citing Use of MedChemExpress (MCE) Pexmetinib
More
Biological Activity
IC50: 1 nM (Tie-2), 35 nM (p38α), 26 nM (p38β)[1]
Pexmetinib is a Tie-2 and p38 MAPK dual inhibitor, with IC50s of 1 nM, 35 nM and 26 nM for Tie-2, p38α and p38β, respectively. Pexmetinib also shows IC50s of 4 nM (Abl), 10 nM (Arg), 28 nM (FGFR1), 47 nM (Flt1), 42 nM (Flt4), 41 nM (Fyn), 26 nM (Hck), 25 nM (Lyn), and 26 nM (MINK), respectively. Pexmetinib (0.5, 1 μM) blocks leukemic cell proliferation and stimulates hematopoietic activity in myelodysplastic syndromes[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 945614-12-0
-
Appearance Solid
-
분자량 556.63
-
화학식 C31H33FN6O3
-
Color White to off-white
-
SMILES
O=C(NCC1=CC(F)=CC=C1OC2=CC3=C(N(CCO)N=C3)C=C2)NC4=CC(C(C)(C)C)=NN4C5=CC=C(C)C=C5
-
Synonyms
ARRY-614
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Cancer Res
SMAD4 and KRAS Status Shape Cancer Cell-Stromal Crosstalk and Therapeutic Response in Pancreatic Cancer. [Abstract]2025 Apr 15;85(8):1368-1389. PMID: 39841099 -
Mol Hum Reprod
Angiopoietin 2 stimulates trophoblast invasion via a mechanism associated with JNK signaling. [Abstract]2021 Feb 27;27(3):gaab014. PMID: 33629098
용액&용해도
DMSO : ≥ 125 mg/mL (224.57 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (3.74 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (3.74 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocol
Cell lines and primary samples are incubated at indicated doses of of TIE2/p38 inhibitor Pexmetinib. Viability is assessed by addition of Cell Titer Blue and measured via Fluostar Omega Microplate reader[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
순도&문서
-
Data Sheet (279 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.7965 mL | 8.9826 mL | 17.9653 mL | 44.9131 mL |
| 5 mM | 0.3593 mL | 1.7965 mL | 3.5931 mL | 8.9826 mL | |
| 10 mM | 0.1797 mL | 0.8983 mL | 1.7965 mL | 4.4913 mL | |
| 15 mM | 0.1198 mL | 0.5988 mL | 1.1977 mL | 2.9942 mL | |
| 20 mM | 0.0898 mL | 0.4491 mL | 0.8983 mL | 2.2457 mL | |
| 25 mM | 0.0719 mL | 0.3593 mL | 0.7186 mL | 1.7965 mL | |
| 30 mM | 0.0599 mL | 0.2994 mL | 0.5988 mL | 1.4971 mL | |
| 40 mM | 0.0449 mL | 0.2246 mL | 0.4491 mL | 1.1228 mL | |
| 50 mM | 0.0359 mL | 0.1797 mL | 0.3593 mL | 0.8983 mL | |
| 60 mM | 0.0299 mL | 0.1497 mL | 0.2994 mL | 0.7486 mL | |
| 80 mM | 0.0225 mL | 0.1123 mL | 0.2246 mL | 0.5614 mL | |
| 100 mM | 0.0180 mL | 0.0898 mL | 0.1797 mL | 0.4491 mL |