Oxysophoridine
Based on 1 Customer Validation
Oxysophoridine (Sophoridine N-oxide) is a bioactive alkaloid extracted from the Sophora alopecuroides Linn. Oxysophoridine (Sophoridine N-oxide) shows anti inflammatory, anti oxidative stress and anti apoptosis effects.
For research use only. We do not sell to patients.
- Purity: 99.18%
- CAS No.: 54809-74-4
- Formula: C15H24N2O2
- Molecular Weight:264.36
-
Storage:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Biological Activity
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HepG2 2.2.15 | EC50 |
0.031 mg/mL
Compound: oxymatrine, OMTR
|
Antiviral activity against Hepatitis B virus infected in human HepG2(2.2.15) cells assessed as reduction in viral DNA level by RT-PCR analysis
Antiviral activity against Hepatitis B virus infected in human HepG2(2.2.15) cells assessed as reduction in viral DNA level by RT-PCR analysis
|
[PMID: 20176893] |
| MDCK | CC50 |
>80 μM
Compound: 7
|
Cytotoxicity against MDCK cells assessed as reduction in cell viability after 48 hrs by CellTiter-Glo assay
Cytotoxicity against MDCK cells assessed as reduction in cell viability after 48 hrs by CellTiter-Glo assay
|
[PMID: 25147619] |
| MDCK | EC50 |
>80 μM
Compound: 7
|
Antiviral activity against Influenza A virus (A/Puerto Rico/8/34(H1N1)) infected in MDCK cells assessed as inhibition of virus-induced cytocidal activity after 48 hrs by CellTiter-Glo assay
Antiviral activity against Influenza A virus (A/Puerto Rico/8/34(H1N1)) infected in MDCK cells assessed as inhibition of virus-induced cytocidal activity after 48 hrs by CellTiter-Glo assay
|
[PMID: 25147619] |
Chemical Information
-
CAS No. 54809-74-4
-
Appearance Solid
-
Molecular Weight 264.36
-
Formula C15H24N2O2
-
Color White to off-white
-
SMILES
O=N12[C@]3([H])[C@@](CCC2)([H])[C@]4([H])N(C(CCC4)=O)C[C@@]3([H])CCC1
-
Synonyms
Sophoridine N-oxide
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Solvent & Solubility
DMSO : 25 mg/mL (94.57 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (9.46 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (9.46 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 100 mg/mL (378.27 mM); Clear solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (275 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
[1]. Cao Z, et al. Oxysophoridine rescues spinal cord injury via anti inflammatory, anti oxidative stress and anti apoptosis effects. Mol Med Rep. 2018 Feb;17(2):2523-2528. [Content Brief]
[2]. Wang YS, et al. Anti-inflammation Effects of Oxysophoridine on Cerebral Ischemia-Reperfusion Injury in Mice. Inflammation. 2015 Dec;38(6):2259-68. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.7827 mL | 18.9136 mL | 37.8272 mL | 94.5680 mL |
| 5 mM | 0.7565 mL | 3.7827 mL | 7.5654 mL | 18.9136 mL | |
| 10 mM | 0.3783 mL | 1.8914 mL | 3.7827 mL | 9.4568 mL | |
| 15 mM | 0.2522 mL | 1.2609 mL | 2.5218 mL | 6.3045 mL | |
| 20 mM | 0.1891 mL | 0.9457 mL | 1.8914 mL | 4.7284 mL | |
| 25 mM | 0.1513 mL | 0.7565 mL | 1.5131 mL | 3.7827 mL | |
| 30 mM | 0.1261 mL | 0.6305 mL | 1.2609 mL | 3.1523 mL | |
| 40 mM | 0.0946 mL | 0.4728 mL | 0.9457 mL | 2.3642 mL | |
| 50 mM | 0.0757 mL | 0.3783 mL | 0.7565 mL | 1.8914 mL | |
| 60 mM | 0.0630 mL | 0.3152 mL | 0.6305 mL | 1.5761 mL | |
| 80 mM | 0.0473 mL | 0.2364 mL | 0.4728 mL | 1.1821 mL |